Corrugated Roofing Sheet Forming Machine For Depot Roofing
1. Instruction of corrugated sheet roll forming machine
This corrugated Y machine use UCT bearings, the UCT bearings is our
company design, standard model of bearings. It makes the machine
more stable and perform better roofing products. All the tie-bars
and bolts are plated with hard chrome also, so it looks more
beautiful and also stronger. The cutting head uses steel boards,
all boards are welded together, this design makes the cutter more
stable when it works.
2. Roll forming machine line parts as below
-- Manual uncoiler, one set, use to hold the raw material which
means the steel coil.
-- Guiding table, one piece, it is usually fixed on the start of
the roll forming part. It is used to guide the raw material feeding
into the rollers.
-- Roll forming part, one set, it is the main part of the whole
line which roll forming the flat sheet into special profile as per
-- Hydraulic cutting device, one set, it includes one cutter and
one hydraulic pump station, the pump drive the cutter to rise and
fall in which way the sheet will be cut off.
-- Discharge table, one set, we will make one four meter or six
meter long table to collect the finsihed products when normal
-- PLC control system, one set, the system usually has English,
Chinese and Russian languge for customer's use. It has inverter to
make the finished products' dimension more accurate.
3. Parameter of this corrugated forming machine line
|Feeding material||PPGI, GI, PPGL|
|Width of the plate||1200mm|
|Thickness of the plate||0.3-0.7mm|
|Diameter of the shaft||Φ75mm|
|Motor power to drive the machine||5.5kw + 4kw|
|Voltage||380V 50Hz 3phase|
|Material of the cutting head||Gr12 , heat treatment HRC58-60|
|Machine frame||350 H steel|
|Side board thickness||16mm|
4. The service we can offer
(1) Once you paid the deposit, we will start the production as soon
as possible. When the machine is finished, you can come to check
the machine, we will arrange your accommodation and relative
schedule. If you don't come, we can test the machine and send you
test video. It's no problem.
(2) Our machines have one year guarantee, within one year, if the
machine parts has some problem, we will be in charge of the
repairing or replace. Also we will deliver the customer some spare
parts together with the machine when loading the machine.
(3) If the buyer need overseas debug, we can also send technician
to your factory, the customer should undertake all related cost
including the accommodation and round-trip ticket of technician:
100 USD/day . The buyer should make sure the safety of technician.
5. Corrugated Roofing Sheet Forming Machine For Depot Roofing
Construction Line chart and details